Recliner Won't Stay Reclined

So your recliner won’t stay reclined? You sit down in your favorite recliner seat, pull the lever to lean back and nothing occurs. You kick back more enthusiastically with some force behind it; just to feel resistance. You take a stab at pulling up on the footrest. It comes up sticks and partway, or breaks once more into the seat. It could have been happening on bit by bit throughout the course of recent weeks or all at once. It’s a normal issue of a lot of recliners. Let’s see how to fix this and other recliner issues as well, such as how to fix a recliner chair that won’t close.

Recliner Doesn’t Stay Reclined

A recliner that recliner won’t stay back can be frustrating. This issue may be caused by a faulty reclining mechanism or worn-out parts. To fix it, try tightening any loose screws or bolts, lubricating the moving parts, or replacing worn-out components. If the problem persists, consider contacting a professional repair service for assistance. But let’s look more into detail about this frustrating issue, shall we?

Identify the Problem

Recliner Won't Stay Reclined

So, what precisely isn’t right with your recliner seat? Here in this article, you will figure out what needs fixing. Before you consider fixing your chair you ought to initially recognize what precisely is wrong with it.

Knowing the issue with your recliner chair won’t just assist you with knowing how to approach fixing it yet in addition let you know what materials and tools you will need to fix it. A few normal issues most recliner chairs experience includes:

  • The chair contains a hole in its seat
  • A recliner seat that won’t close
  • The footrest leaning of your reclining seat
  • A busted reclining mechanism
  • Some of the problems can easily fixed by replacing some certain parts such as:
  • Broken cables
  • Spoilt springs
  • Broken handles, and more

Now that you know about some of the common problems which most of the recliner chaise face, let’s discuss different ways of fixing them all. Check out the guide below for a detailed understanding.

Tools You’ll Need 

Recliner Won't Stay Reclined

After spotting the issue, the next job is to open your toolbox and use all the right tools that help you in rectifying this problem. Don’t have the necessary tools? Subsequent to detecting your concern, now is the time’s to open your toolbox and get a hold of all the necessary instruments and tools you’ll need to rectify this issue.

Some of the important tools that you’ll need include pliers, screwdriver, adjustable wrench, different recliner replacement parts (springs, handle, cable), and more.

Fixing your Recliner that won’t stay Reclined

Recliner Won't Stay Reclined

It’s no big deal for recliner chairs, similar to every other item to encounter a decrease in their capacity because of unreasonable use, as well as aging of the lift seat. However, one can easily solve the problem by using the right measures and correct tools.

If your recliner won’t stay back, it is normally a very simple fix and requires a couple of moments; observe that wrecked or missing fasteners, such as nuts, screws, and bolts will require supplanting.

It’s a common problem for many users of recliners. The recliner will stay in the seated position, but will not stay reclined all the way. Here are some possible solutions to help you fix this issue.

First, check to see if your recliner has a setting that allows you to adjust the recline angle. Some models have an adjustable footrest or knee support that can be used to adjust the angle of the seat. If your model does not have an adjustable footrest, you may need to seek out a new recliner.

Next, try adjusting the recline manually by pulling on one of the chair’s handles. If this does not work, you may need to take the chair apart and clean or lubricate any moving parts or mechanisms. You should also check that all of the bolts and screws are tight and properly aligned.

Another solution is to try adjusting the recline mechanism manually by pressing on a lever or turning a knob. Make sure that you release the lever or turn the knob completely before attempting to move it again.

If none of these solutions work, you may need to look for a new recliner. You should also make sure that you are using the right type of chair for your needs by reading through our guide about which types of chairs are best for various uses and individuals.

Fixing a Recliner Footrest

Recliner Won't Stay Reclined

For this issue, you will require your spanner, lubricant, and a cover or nylon. Assuming you notice unusual behavior in the footrest of your recliner chair or it’s stuck and won’t stay up, you ought to follow the below-mentioned steps:

  • Put your recliner back to its initial upright position and test that the footrest stays put.
  • Grease up the footrest joints widely.
  • Utilizing your spanner, ensure that the bolts that hold the footrest and the reclining mechanism are well tightened.
  • Set your chair back to its underlying upright position and test that the footrest stays put.

But for more about fixing a recliner footrest, check this out: How to Fix a Recliner Footrest

Fixing a Recliner that Won’t Close Properly

For this issue, you will require a screwdriver, spanner, cover, and a lubricant. Look at the points below:

  • In the first place, you should turn the recliner chair on its face to uncover the mechanisms plainly or go it to its side opposite the handle.
  • Check whether you notice free screws, nuts, or worn bolts. Assuming there are, fix them.
  • Increase the leaning back pressure by turning the thumbwheels as well as wing nuts clockwise.
  • Decline the pressure by turning them anti-clockwise
  • Ensure that the chair’s entire mechanism is safely fixed to the seat frame.
  • Presently, grease up all the moving parts of the chair

Ways of Replacing the Reclining Mechanism on a Reclining Sofa

Recliner Won't Stay Reclined - Pannow Double Recliner Loveseat with Console Slate, Double Reclining Sofa with Cup Holder

To supplant the leaning back mechanism on a reclining couch you will require another reclining mechanism, a spanner, screwdriver, nylon cover, and lubricant.

Keep this noted that fixing a totally broken reclining mechanism can be very costly. In the event that you decide to do this against buying another chair the following will give you a well-detailed step on how to supplant the mechanism of your reclining couch.

First of all, turn the recliner chair so that you’ll have a complete access to its backside. Make use of a screwdriver and softly press the release of the recliner seat on both sides. Simply take off the back of the recliner seat entirely.

The next job is to remove the back cover letting you to gain admittance to locks holding the backside of the recliner chair. One can easily release the footrest of the recliner seat. Turn the recliner chair upside down to situate the bolts holding the reclining means.

After this, remove the cable. Loosen the bolts present on the chair keeping the frame of the recliner seat and the mechanism collectively. Next, remove the reclining means from the frame. Put in your latest mechanism on the chair’s frame. Simply screw the footrest to your fresh reclining mechanism 

The next job is to release the cable back. After this, lift the reclining means back to the rails and lock it back to position After this, place the recliner chair in an upright spot and test.

Fixing of Reclining Spring

Recliner Won't Stay Reclined

It shouldn’t come as a revelation to see that your recliner chair spring has even fallen off or harmed following extensive use. We’ll discuss how to fix them below. Keep all the necessary tools you’ll require for this task handy and adhere to the guidelines outlined below.

To fix a spoilt spring in your chair you will require a screwdriver, new spring (on the off chance that the old spring is harmed). Flip around the chair. Affirm the condition of the spring, loose or broken. Take out the spring and contrast it with your new spring to be sure you got the right kind

Set the new one back in the old one’s place once you’re certain it’s a similar kind. If by chance the old springs are just displaced from their holders yet intact, simply fix them back to position with no requirement for substitution. You can utilize a string to pin them to the chair’s frame of opposite direction to avoid a recurrent event.

Here’s my top recommendation for a rocker recliner:

Comhoma Leather Recliner Chair Modern Rocker

Can you Manually Recline a Power Recliner?

If you’ve ever owned a power recliner, you know the importance of being able to recline at the touch of a button. Whether you’re watching TV, taking a nap, or just relaxing, the ability to recline quickly and easily is a huge convenience. But what happens when the power goes out? Can you recline your chair manually? The answer may surprise you.

While most power recliners rely on electricity to operate, there are actually a few models that can be reclined manually in case of an emergency. So if you find yourself stuck in a power outage, don’t panic – you can still kick back and relax in your favorite chair.

Fixing a Recliner Chair with a Hole in its Seat

After some time you might stumble on a hole in your #1 lift seat. This shouldn’t be surprising; recliner chair materials might endure mileage or even friction consume after expanded use.

Assuming that you observe a hole in your chair lift seat, here’s an idea to fix and cover it up. For this issue, you will require scissors, glue, cotton, and a blade. After you probably gotten these materials, follow the below-listed steps to cover the hole in your chair.

In the first place, trim the spots where the burn/tear is, eliminating all discolor from the area. Now, cut out a fix material from a hidden side of your chair. Put cotton underneath the opening, properly filling it up. Utilizing fabric glue, touch the edges of the patch and the opening/hole. Now conceal the tear/cut with your piece of chair cloth.

My Recliner Won’t Stay Reclined: In Conclusion

So now you know how simple it is fix a recliner chair that won’t stay reclined. It won’t take long and you can follow the steps explained. One can without much of a stretch save costs by appropriately keeping up with your chair and fixing it yourself in any event, when it turns out faulty.

Consistent maintenance of your chair is important to permit it last longer and work with more effectiveness. Assuming you are consistent in your chair support, it will assist you with recognizing issues and follow up on them before they can cause significant breakdowns which could prompt a more costly fix.

I trust this article was clear enough to grasp to help you on your mission to saving and being your own chair engineer. Assuming that you adhere to through with the guidelines here, you won’t have to stress over spending a few hundred or thousands of dollars on a new recliner chair.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *